Alexor PC9155D-433 Especificações descarregar pdf (Página 29)

Programming Navigation

Navigating through programming is simple and intuitive. To enter Installer programming:

Step 1 – Enter [*][8] + [Installer Code]

The default installer code is [5555]

Step 2 – Enter the required 3-digit installer programming section (‘Enter Section’ will be displayed)

At this point, you have the option of choosing the desired programming method:

Section Number Programming

Quick Enroll

Template programming

Section Number Programming:

This is the traditional method of programming and allows the user to enter any programming section.

When using this method, there are two types of programming sections:

Toggle Sections

Data Sections

Toggle Section:

Toggle sections consist of a series of options that may be enabled or disabled. To toggle an option ON or

OFF, press the key number corresponding to the option.

Option Enabled Option Disabled

To exit a toggle section, press [#]

Data Section:

Data sections require multiple 2 or 3 digit number entries. Data sections allow for both decimal or

hexadecimal entries (some data sections have fixed values where the available entries are provided from a

chart. For example ‘Zone Definitions’). To enter hexadecimal data, first enter [*] followed by [1] to [6] to

enter [A] to [F] respectively. To exit hexadecimal programming, enter [*] again.

To exit a data section, either complete all entries or press [#]

Once you exit a programming section, a new 3-digit section may be entered

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 49 50

Sem comentários

Alexor PC9155D-433 Especificações Página 29