Alexor PC9155D-433 Especificações descarregar pdf (Página 35)

Enrolling wireless detectors

Step 1 – Enter Quick Enroll ([*][8] + Installer Code + [898])

- the display will read ‘Wireless Enrollment Mode’

Step 2 – Trigger the detector

Door/window contact – activate tamper or violate contact

Motion detectors – activate tamper

Smoke Detector – activate tamper

Glassbreak Detector – activate tamper

Panic Pendant – Press and hold button for 2-3 seconds

CO Detector – activate tamper

Flood Sensor – activate tamper

- the display will indicate the serial of the detector triggered

Step 3 – Press [*] to confirm the correct device

Step 4 – The keypad will display the next available zone number, enter [*] to

accept. If a different zone is required enter the new 2-digit zone number (01 – 32)

Step 5 – The keypad will display the recommended zone definition, enter [*] to accept. If a

different definition is required, enter the new 2-digit zone definition and enter [*] to

Step 6 – Repeat Steps 2-5 to enroll additional keypads

Notes:

- if the display does not indicate the serial number of the desired detector to be enrolled, press [#] and

repeat Step 2

- if the zone number entered in Step 4 is already occupied with a different serial number, the keypad will

prompt to enter [*] to replace with the new serial number or [#] to keep the previous device and return to the

zone number entry screen

Common Zone Definitions (refer to installation manual for a complete list)

[01] – Delay 1

[03] – Instant

[05] – Interior Stay/Away

[87] – Delayed 24 Hr Fire

[15] – 24 Hr. Medical

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 49 50

Sem comentários

Alexor PC9155D-433 Especificações Página 35