Alexor PC9155D-433 Guia de Instalação

Models: PC9155-433/868 PC9155G-433/868 PC9155D-433/868Used with: WT5500-433/868 WT5500P-433/868 Series 2-way Wireless KeypadIMPORTANT: This

PC9155 Wireless Alarm System2-2 Figure 2-3 Mounting & Wiring Details Phone Line T1-Brn Connects to in-house phone lineR1- Gra Connects to in-house

2 Installation2-32.2 Wiring1. I/O WiringThe two I/O terminals can be programmed as hard-wired zone inputs and/or PGM outputs. See programming section

PC9155 Wireless Alarm System2-42.3 Wireless Device EnrollmentInstalling a one-way or two-way wireless device requires programming the system with the

2 Installation2-5Enroll wireless devices in the following sequence:• Keypad• Sirens• Sensors• Pendants• Wireless KeysRefer to the associated installat

PC9155 Wireless Alarm System2-6Enrolling Sensors & Pendants Step1Enter [*][8][5555][898] “Wireless Enrollment Mode” is displayed.Step2• Place the

2 Installation2-72.4 Global Wireless Device Placement Test2.5 Individual Wireless Device Placement TestWireless Device PlacementPerform the Wireless D

PC9155 Wireless Alarm System2-82.6 GPRS/Ethernet Module Setup/InitializationStep 2Enter a 2 digit zone number, keypad number, or siren number dependin

3 Operation3-13 Operation3.1 Operating Modes3.1.1 – Away ArmingAway Arming arms the entire system including the perimeter and interior devices. The Re

PC9155 Wireless Alarm System3-2[][1] – Bypass/Re-activate Stay/Away and Night ZonesPress [][1] to enter Bypass mode. If the Code Required for Bypas

3 Operation3-3[][6] – User FunctionsTo access the User Functions section, press [][6] followed by the master or supervisor code. Select one of the f

i SAFETY INSTRUCTIONS FOR SERVICE PERSONNELWARNING: WHEN USING EQUIPMENT CONNECTED TO THE TELEPHONE NETWORK, THERE ARE BASIC SAFETY INSTRUCTIONS THAT

PC9155 Wireless Alarm System3-4[][7][1 or 2] – Command Outputs (1&2)Press [][7] then [1] or [2]. If the Command Output Code Required option is e

4 Programming4-14 ProgrammingThe PC9155 can be programmed using three methods:• Template Programming - Allows the minimum required data to be programm

PC9155 Wireless Alarm System4-2• Digit 1 selects one of the following zone definition options for the first 8 zones. A ‘0’ in the digit 1 locationindi

4 Programming4-3• Digit 2 selects one of the following reporting code options:• Digit 3 selects one of the following options:Digit 3 - Table Headings

PC9155 Wireless Alarm System4-4Digit 4 indicates/selects one of the following DLS connections:4.2 DLS Programming4.2.1 Local Programming with PC-LinkF

5 Installer Programming5-15 Installer Programming5.1 Index to Programming OptionsSect Description

PC9155 Wireless Alarm System5-25.2 Programming WorksheetsDefNACPEU00 Null Zone 14 Future Use 28 Future Use01 Delay 1 15 24-Hour Medical 29 Future Use0

5 Installer Programming5-3 For 4-digit codes the default is the first 4 digits00 Null PGM (Not Used) TLM and Alarm01 Fire and Burglary Output For Futu

PC9155 Wireless Alarm System5-4NA CP EUON OFF1999 [F] Key Enabled  [F] Key Disabled2 [P] Key Audible (Siren / Beeps)  [P] Key Silent3999 Quick Ex

5 Installer Programming5-5Zone Type33 Future Use35 Future Use99999934 Future Use929 Future Use26 24-Hour Non-Alarm (local alarm)99911 24-Hour Burglary

iiKuva 1MakuuhuoneMakuuhuoneMakuuhuoneOlohuoneKeittiöGuidelines for Locating Smoke & CO DetectorsThe following information is for general guidance

PC9155 Wireless Alarm System5-6NA CP EU NA CP EU[202] Zone 1-8 [203] Zone 9-16 [204] Zone 17-24 [205] Zone 25-32 [206] Zone 33-34NA CP EU NA CP EU NA

5 Installer Programming5-7Alarm CancelledFor Future UseKeypad [A]uxiliary AlarmKeypad [P]anic RestoreKeypad [F]ire RestoreCross Zone / Police Code Ala

PC9155 Wireless Alarm System5-8[330]-[332] Tam per Reporting Codes[338] Miscellaneous Tamper Reporting CodesKeypad Lockout[330]Zone 25Zone 33[341] Mis

5 Installer Programming5-90000000000[346] Maintenance Restore Reporting CodesFor Future Use[345] Maintenance Alarm Reporting Codes[342] Opening (Disar

PC9155 Wireless Alarm System5-10[350] Communicator Format Options1st Telephone Number 2nd Telephone Number 3rd Telephone Number 4th Telephone NumberCP

5 Installer Programming5-11NA CP EUON OFF1999 Communications Enabled  Communications Disabled2 Restores On Siren Time-Out  Restores Follow Zones3

PC9155 Wireless Alarm System5-12NA CP EUON OFF1 Answering Machine / Double Call Enabled Answ. Machine / Double Call Disabled2999 User Enable DLS 

5 Installer Programming5-13*Attributes for Option 9 & 10 SectStart Time End TimeValid times areNA CP EUON OFF1 Tampers Enabled  Tampers Disabled

PC9155 Wireless Alarm System5-14NA CP EUON OFF19 50 Hz AC Input  60 Hz AC Input2  Time Base is Internal Crystal  Time Base is AC Line3 AC/DC Armi

5 Installer Programming5-15Sect.Value = Entry x 15 minutes. E.g., 6x15 minutes equals 1.5 hrs. Valid entries are 4-96 (1Hr - 24Hr)[082] [083] [084]

Limited WarrantyDigital Security Controls warrants the original purchaser that for a period of twelve months from the date of purchase, the product sh

PC9155 Wireless Alarm System5-16#5Def03Def04Def27Def30Def13Def14DefRefer to section [804][141]-[156] in the Programming Descriptions section of this g

5 Installer Programming5-17NA CP EUON OFF1999 Siren Alarm Enabled  Siren Alarm Disabled299 Buzzer Notifications Enabled  Buzzer Notifications Disa

PC9155 Wireless Alarm System5-18NA CP EUON OFF1  Ethernet Receiver #1 Supervised  Ethernet Receiver #1 Not Supervised2  GPRS Receiver #1 Supervised

5 Installer Programming5-19OBF5 / 3061Valid Entries are 0000-2359, 9999 to disableValid Entries are 0000-2359, 9999 or FFFF to disable[851][223] GPRS

PC9155 Wireless Alarm System5-20Enter 55 to restart the panel (unplug the power cable from the analogue module).[898] Wireless Device Enrollment See 2

5 Installer Programming5-21 Enter [999][Installer Code][999] See Chapter 6.3 Resetting the System to Factory DefaultsFunction Key Options[00] Null Key

PC9155 Wireless Alarm System5-22—NA CP EUON OFF1999 [F] Key Enabled  [F] Key Disabled2999 [A] Key Enabled  [A] Key Disabled3999 [P] Key Enabled 

5 Installer Programming5-23NA CP EUON OFF1999 Local Clock Display Enabled  Local Clock Display Disabled2 Local Clock Displays 24 Hr Time  Local Cl

PC9155 Wireless Alarm System5-245.3 Programming DescriptionsThis section describes all of the PC9155 programming options. [001]-[002] Zone Definitions

5.3 Programming Descriptions5-25iThis zone type must NOT be used for wireless zones. Activation of a keyswitch zone is intended to arm or disarm the s

ivTable of ContentsChapter Description Page1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

PC9155 Wireless Alarm System5-26[005] System Timers This section has two subsections. Entry/Exit delays are in subsection 01and Bell Cut-off is in sub

5.3 Programming Descriptions5-27[012] Keypad Lockout Options This section determines how the keypad lockout function operates. • 24 hour supervisory b

PC9155 Wireless Alarm System5-28[013] First System Options [014] Second System Options[015] Third System Options Option Description[1]ON: Zone 33/PG

5.3 Programming Descriptions5-29[016] Fourth System Options [2]ON: Panic Key Audible. When a valid Panic key alarm is generated, the keypad buzz

PC9155 Wireless Alarm System5-30[018] Sixth System Options [023] Tenth System Options Code[024] Eleventh System Options Code Option Description[1]Fo

5.3 Programming Descriptions5-31[030] Zone Loop Response [101]-[134] Zone Attributes The following options can be enabled or disabled for each zone.

PC9155 Wireless Alarm System5-32[167] GPRS/Ethernet Interface Communications Wait for ACK[168]-[169] Daylight Saving Time [170] PGM Output Timer[176]

5.3 Programming Descriptions5-33 [301] First Telephone Number[302] Second Telephone Number[303] Third Telephone Number[304] Call Waiting Cancel Dialin

PC9155 Wireless Alarm System5-34[328] Miscellaneous Alarm Reporting CodesDuress AlarmThis reporting code is transmitted whenever a Duress code is used

5.3 Programming Descriptions5-35Exit FaultIf an Exit Error occurs and entry delay expires before the system is disarmed, this reporting code is sent.

PC9155 Wireless Alarm System1-11 IntroductionThis manual provides installation and programming information for the PC9155 two-way wireless series of a

PC9155 Wireless Alarm System5-36General Zone Fault & RestoreThis reporting code is sent whenever a zone has entered the fault state. This occurs w

5.3 Programming Descriptions5-37Swinger Shutdown (Maintenance Troubles & Restores)This value determines the number of times the same system Mainte

PC9155 Wireless Alarm System5-38[381] Second Communicator Options Code [382] Third Communicator Options Codei If all 5 attempts to the designated phon

5.3 Programming Descriptions5-39[383] Fourth Communicator Options Code[389] GPRS/Ethernet Fault Check TimerThe programmed number of poll commands that

PC9155 Wireless Alarm System5-40[402] Downloading Computer’s Telephone NumberThis phone number enables the control panel to call the downloading compu

5.3 Programming Descriptions5-41[591]-[592] Inactivity TimersInactivity timers are used to create two windows to monitor 24-hr. non-alarm zone activit

PC9155 Wireless Alarm System5-42[701] First International Options Code [702] Second International Options Code [703] Delay Between Dialing AttemptsFor

5.3 Programming Descriptions5-43[804]-[001]-[032] Wireless Device Serial NumberThese sections are for manual enrollment of one-way wireless device ser

PC9155 Wireless Alarm System5-44[804][181]-[182] Wireless Key Enable/DisableThese sections enable each individual key enrolled on the system. The keys

5.3 Programming Descriptions5-45[804][330] WT4911 Maximum Bell Activation TimeThis value determines the maximum time the wireless bell/siren will soun

1 Introduction1-21.3 Controls & IndicatorsThe PC9155 can have a maximum of eight status indicators located on the front panel. The four indicators

PC9155 Wireless Alarm System5-46[999] Restore Factory Default ProgrammingAll programming, including wireless device programming, returns to the factor

5.3 Programming Descriptions5-47[001]-[069], [100]-[125] Label ProgrammingZone and other labels in these sections can be customized. Default labels ar

PC9155 Wireless Alarm System5-48[075] Second Keypad Options[076] Third Keypad Options[077] LCD MessageEnter a 32 character message. If anything other

5.3 Programming Descriptions5-49[998] Initiate Global Label BroadcastProgrammed keypad labels are broadcast and installed on all system keypads from k

PC9155 Wireless Alarm Panel6-16 Testing & Troubleshooting6.1 Wireless Device Placement TestSee sections 2.4 and 2.56.2 Testing the SystemInform th

6 Testing & Troubleshooting6-26.3 Resetting the System to Factory Defaults6.4 TroubleshootingResetting the alarm system returns it to the factory

PC9155 Wireless Alarm Panel6-3[][2] Troubles • Power up system• Enter [][2] to view Troubles•Perform actions indicated in the tables below[][2] Tro

6 Testing & Troubleshooting6-4Trouble [2] AC FailureAC FailureNo AC at panel AC input terminals. • Verify voltage measured across AC terminals is

PC9155 Wireless Alarm Panel6-56.5 Battery Removal/ReplacementDisconnect AC power and battery before proceeding.Removal: (1) Disconnect battery cable f

Appendix A: Reporting Code FormatsAPP-1Appendix A: Reporting Code FormatsThe following tables contain Contact ID and Automatic SIA format reporting co

PC9155 Wireless Alarm System1-3Entering LettersSome commands require the entry of letters (i.e., A, B, C, D, E, F).To enter a letter, press and the

PC9155 Wireless Alarm PanelAPP-2Section #Reporting C o de C o de Sent WhenDialer DirectionAutomatic Contact ID CodesSIA Auto Rep Codes[346]Battery Tro

Appendix A: Reporting Code FormatsAPP-3Section #Reporting C o de C o de Sent WhenDialer DirectionAutomatic Contact ID CodesSIA Auto Rep Codes[347]Keyp

PC9155 Wireless Alarm PanelAPP-4Contact ID Programmed Zone Alarm/Restoral Event Codes(as per SIA DCS: ‘Contact ID’ 01-1999):Program any of these codes

Appendix B: Communicator Format OptionsAPP-5Appendix B: Communicator Format OptionsThe following format options are programmable in section [350] 0102

PC9155 Wireless Alarm PanelAPP-6Appendix C: 2-Way Audio Verification (PC5950)Not approved for use with UL/ULC listed installations.Audio Verification

Appendix D: Regulatory Approvals InformationAPP-7Appendix D: Regulatory Approvals InformationNorth America FCC COMPLIANCE STATEMENTwill provide advanc

PC9155 Wireless Alarm PanelAPP-8This product has been tested and found in compliance with the following standards:UL1023 Household Burglar-Alarm Syste

Appendix D: Regulatory Approvals InformationAPP-9SIA False Alarm Reduction InstallationsFor a list of the defaults value programmed when the unit is s

EuropeThis product is in conformity with:EMC Directive 2004/108/EC based on results using harmonized stan-dards in accordance with article 10(5), R&am

2 Installation2-12 Installation2.1 Hardware InstallationHardware InstallationStep1Select a suitable location for the alarm panel in a dry location, cl